Los Angeles, California
888-664-5277

A Division of

 

Home Page

Audio

Video

CAMERA

Intercom & IFB

Switchers

Routers

POST-PRODUCTION

Test

Flight Packs

Specialized Items

Fiber Optic

Custom MAde Cables

Cable Repair

Monitors

Rental Forms 

CAble Rentals


Hard Drive Recovery

Terminal

Contact
Telex (RTS) PS-60 6 Channel Two Wire Power Supply
 

RTS (Telex) PS-60 2 Wire 6 Channel Power Supply 

RTS (Telex) PS-60 Power Supply Rear Panel

The Telex (RTS) PS-60 is the largest and most powerful Intercom Power Supply available.  It offers 6 Channels of wet intercom power allowing up to 20 beltpacks per channel for a total of 120 beltpacks to operate simultaneously.  Cable to carry two channels of intercom using RTS or Telex brand on intercom user stations or beltpacks.  The PS-60 is best operated  with the RTS SAP-612 for a more powerful intercom signal distribution capability.

Daily Rental Rate

Weekly Rental Rate

Monthly Rental Rate

$40

$120

$360

What's Included:

1 PS-60

Manual
(There is no PS-60 Manual available, however, the PS-31 Manual covers the majority of operational features)

PS-31 Operators Manual

Specifications

MODEL PS60 SPECIFICATIONS

Channels

6 Channels

Connectors

Three XLR-3 type connectors (2 channel)
Two XLR-4 connectors (three channel) (Channel 1-2-3 and Channel 4-5-6

Two XLR-4 Connectors Audio Out Ch 1-3-5 and Audio Out 2-4-6

Three powered channels, CHI, (audio + DC + 200 ohm/400 ohm 10% termination}, and one passive channel' CH2, (audio + 200/400 ohm 20% termination}.

2 XLR 3 Pin - Assignable Channel Outputs (Normal Assignment: Channel 1 & 3 and Channel 1 & 5

Program Audio IN - 2 XLR 3 Pin

Intercom Audio Level:  2 volts pp nominal
Head Room:  6 dB minimum
Frequency Response:  75 Hz to 20 kHz (-3 dB) unloaded

Output Voltage

No Load:  32.0 +2.0. -1.0 volts
Full Load:  24.0 volts. nominal

Output Impedance:  

200 or 400 ohms 20%. switchable. On powered channel. 200 ohms. nominal. is maintained from 18.0 to 33.0 volts.

Output Current

Max before fault indication: 1.5 amps
Sustained Overload 50 C ambient: 2.0 amps
Max before foldback limiting: 2.5 amps
Short circuit current: 0.5 amps
Startup current: 0.5 amps
Max Total Sustained Current (50 C ambient): 2.0 amps

Signal Level

Nominal:  2.0 volts peak to peak
Maximum:  5.0 volts peak to peak

Frequency Response

100 hertz to 20 kilohertz +1, -5 dB

Signal-to-Noise Ratio

Reference 2.0 volts. peak to peak: 60 dB nomina]

Mains Voltage

Standard: 117 volts :t10%. 50 -60 hertz
*P Option:  234 volts :t10% 50-60 hertz
#D Option:100 volts +10%. -5%.50-60 hertz

Mains Amperes

0.40 at 117 volts :t10%, 50-60 hertz
0.20 at 234 volts :t10%, 50-60 hertz
0.40 at 100 volts +10%, -5%,50-60 hertz

Environmental

Temperature

Operating:  00 to 50C
Storage:  -40 to 70C
Humidity:  0 to 95%, non-condensing)

Dimensions

Height:  1.72 inches (44 millimeters)
Width:  8.186 inches (207.9 millimeters)
Depth:  8.33 inches (211.6 millimeters)

Weight

PS15:  4.29 pounds (1.95 kilograms)
MCP1:  1.0 pounds (0.454 kilograms)
MCP2:  1.0 pounds (0.454 kilograms)

Finish

Thermoplastic front panel. aluminum case. light gray
finish


   
Audio  |  Video  |  Intercom & IFB  |  Switchers   |  Routers  |  Test  |  Terminal  |  Flight Packs  |  Specialized Equipment  |  Fiber Optic  |  Rental Forms  |  Home Page |   Cable Repair 
Custom Made Cables  Cable Rentals  |  Monitors  |   Hard Drive Recovery  |  Contact