The Model SAP612 Source Assign Panel independently assigns each of 24 Two Wire channels (12 two-channel Two Wire user station strings) to any one of six busses, or common channels.  All channels assigned to a common buss channel can intercommunicate and exchange call signals. One to three Two Wire power supplies (such as Models PS8 or PS15) may be conveniently connected to the SAP612 to distribute power to the intercom stations. Or, the SAP612 may be used with a non-Two Wire power source. Switchable 200-ohm line terminations are built into the SAP612 for proper line termination when using a non-Two Wire power source. The SAP612 has two balanced, transformer isolated program inputs. Program 1 is permanently assigned to buss channel 5, and program 2 is permanently assigned to buss channel 6.

Daily Rental Rate

Weekly Rental Rate

Monthly Rental Rate

$40

$120

$400

What's Included:

1 SAP-612

Operator's Manual

2 Stereo 1/4" Phone Plug to Female 3 Pin XLR

RTS SAP-612

Operators Manual

Specifications

SAP-612

Maximum Switch Carrying Current

1.0 ampere per output

Maximum Switch Breaking Current

0.5 ampere per output.

Inputs

Full duplex lines (busses): 6

Program Inputs: 2

Outputs (Two Channel)

User Station Strings: 12

Program Inputs

Impedance: 600 ohms

Level: 0 dBm

Power Requirements

No external power required, Power distributed from

RTS Systems power supplies PS 15 or PS31 connected at rear panel of SAP-612.

Size (HXWXD)

1.72 in. (44 mm) X 19 in. (483 mm) X 8 in. (201 mm).

Allow another4.0 inches (102 mm) depth for cables on rear panel.

Weight (Mass)

4.5 lbs (2.05 kg)

Color

Grey, Fed. Std. #595A-26492